Rome Resources Ltd. announced that it has started preparations to commence extension diamond drilling on its Kalayi and Mont Agoma Prospects on PEPM 13274 and PR 15130 respectively. The Company further identified a 26m wide zone of anomalous tin in a trench manually excavated across the high-grade tin in soil anomaly in the recent infill soil sampling programme at Kalayi. Infill Soil Sampling, Trenching and Planned Drilling at Kalai Prospect Recent infill soil sampling confirmed a high-grade tin in soil anomaly (>80ppm Sn; maximum 1066ppm Sn using the Niton XRF analyser) is associated with the highly significant drilling results of 12.5m at 1.06% Sn including 2.5m at 3.39% Sn and 0.5m at 11.7% Sn from 41.5m in KBDD003 and 2.5m at 2.60% Sn incl 0.5m at 7.15% Sn from 79m in KBDD002.

Drilling to date was below limited artisanal workings. A trench was excavated manually 100m NW of the workings along the same trend. A broad 26m wide anomalous tin zone with maximum Niton XRF values of 0.1% Sn at surface was exposed and will be tested at depth in the planned drilling programme.

Additional holes have been planned to intersect the mineralization identified in the first 4 holes at deeper levels and on strike to better understand the geometry of these mineralized bodies which typically pinch and swell at Kalayi. The Company will be targeting tin only at Kalayi in a similar setting to Alphamin's deposits. Mont Agoma Prospect Drilling: Drilling at Mont Agoma has defined a broad 250m wide zone of copper, zinc, lead, silver and tin mineralisation over 300m which is open in all directions.

Mineralisation is focused in 3 main structures comprised of a >100m wide western zinc zone, a central copper, zinc, silver and tin zone and an eastern tin zone. Drilling to date suggests that the focus has been on the upper portion of the mineralised system with a strong likelihood for tin mineralisation to dominate at deeper levels as tin crystalizes out much higher fluid temperatures therefore closer to the granitic source. Drillhole MADD010A intersected 26m at 0.2% Sn together with a significant 41m at 3.5% Cu which supports an increase in tin at depth and equates to the transition zone at San Rafael in Peru which is currently one of the world's largest tin producers.

The planned drilling will target tin mineralisation at much deeper levels than the current drilling to confirm the model.