Genesis Metals Corp. reported assay results from the final 5 holes (1,320 metres) drilled as part of its recently completed 2020 Phase II (25 hole, 6,208 metre) diamond drilling program. The Chevrier Gold Project is located in the eastern Abitibi Greenstone Belt of Central Quebec. All holes reported herein are from the Mole zone, located 750 metres northeast of the Fox zone where a number of the previously reported Phase II high-grade drill holes were located. Highlights include: 40.89 g/t gold over 3.40 metres in hole GM-20-88 starting at 41.20 metres down hole, within a wider zone assaying 10.03 g/t gold over 15.10 metres starting at 37.05 metres down hole 4.89 g/t gold over 3.80 metres in hole GM-20-88 starting at 157.00 metres down hole, within a wider zone assaying 1.10 g/t gold over 37.25 metres starting at 132.05 metres down hole 114.0 g/t gold over 1.00 metre in hole GM-20-89 starting at 137.00 metres down hole 2.69 g/t gold over 9.75 metres in hole GM-20-89 starting at 225.25 metres down hole, within a wider zone assaying 1.43 g/t gold over 33.00 metres starting at 216.00 metres down hole - Insufficient drilling has been completed to definitively determine true thickness; true thickness is estimated to be between 65-90% for holes GM-20-87 to -91 based on angle to core axis and 3D interpretation The objective of the Phase II program was to continue drill testing the extensions and down plunge continuity of newly recognized high-grade gold shoots within and near the Chevrier Main deposit area (1.2 km by 0.2 km), and to delineate their boundaries and mineralized volumes within and below the pit shell from the 2019 mineral resource estimate. Results included in this news release are all from the Mole zone. The Genesis technical team has recognized a previously under-explored and poorly defined higher- grade component to the Chevrier Main gold deposit. A new 3D geological and mineralization model is being completed to better represent the distribution and geologic controls on higher-grade gold mineralization. This model was utilized to inform the planning and execution of Phase I and Phase II drilling programs in 2020. Methodology and QA/QC: The analytical work reported on herein was performed by Activation Laboratories Ltd. of Ancaster, Ontario, an internationally recognized analytical services provider. All samples are analysed for gold using standard Fire Assay-AA techniques. Samples returning over 5.0 g/t gold are analysed utilizing standard Fire Assay-Gravimetric methods. The Company follows industry standard procedures for the work carried out on the Chevrier project, with a quality assurance/quality control (QA/QC) program. Blank, duplicate, and standard samples were inserted into the sample sequence sent to the laboratory for analysis. Genesis detected no significant QA/QC issues during review of the data.