Dynacor Gold Mines Inc. announced underground drilling results performed on the Manto Dorado structure oriented N58degE dipping 22degNW and on three mineralized veins, namely the A-, Rosa and Tumi veins, shows the results obtained from nine holes that have been drilled from the underground drilling station. Three drill holes, HDD-05-13-350, HDD-06-13-350 and HDD-09-13-350 have just been drilled from underground and intercepted the mineralized Manto Dorado structure and two drill holes, HDD-07-13-350 and HDD-08-13-350 intercepted three mineralized quartz veins with gold and polymetallic mineralization, the A-vein, Rosa vein and Tumi vein. One of the three drill holes intercepted gold grades and polymetallic mineralization in the Manto Dorado structure and one of the two drill holes intercepted high gold grades and high copper grades in the quartz vein structures A-vein, Rosa vein and the Tumi vein.

Manto Dorado Structure results of the three recent drill holes (HDD-05-13-350, HDD-06-13-350 and HDD-09-13-350) confirm the continuity of the mineralization from the cross cut downwards to the intersect of drill hole HDD-09-13-350 that is located 41.0 m below the cross cut. The latter drill hole returned grades of 7.09 g/t Au, 0.09 oz/t Ag and 0.46% Cu over a true width of 1.70 m. Overall, the seven underground drill holes (838 meters) targeting the Manto Dorado structure confirm the continuity of the high grade gold and copper mineralization extending the mineralization from the surface cut to the drill hole HDD-04-2008, to the cross-cut, to the drill holes HDD-09-13-350, HDD-01-13-350, HDD-04-13-350, HDD-02-13-350 and HDD-03-13-350 extending the mineralization 295 m downwards from the surface. The results of three drill holes HDD-05-13-350 (0.99 g/t Au, 0.07 oz/t Ag, 0.01% Cu over 1.91 m), HDD-06-13-350 (0.37 g/t Au, 0.09 oz/t Ag, 0.01% Cu over 1.10 m) and HDD-09-13-350 (7.09 g/t Au, 0.09 oz/t Ag, 0.46% Cu over 1.70 m).

A-vein, Rosa vein and Tumi vein underground drilling of drill holes HDD-07-13-350 and HDD-08-13-350 tested the high grade gold and copper mineralization at depth in three quartz veins and extending the mineralization in the Rosa vein at depth an extra 245 m from the drill hole HDD-11 to the recently drilled hole HDD-08-13-350. High grade gold (Au) and copper (Cu) assays for all three veins were found in drill hole HDD-08-13-350 (A-vein 17.28 g/t Au, 0.25 oz/t Ag, 2.68% Cu over 1.50 m, Rosa vein 14.31 g/t Au, 0.70 oz/t Ag, 9.57% Cu over 0.50 m, and Tumi vein 122.00 g/t Au, 1.03 oz/t Ag, 6.59% Cu over 0.70 m), whereas lower grades were found in drill hole HDD-07-13-350. Sample Analysis and QA/QC procedures, the samples are sent to the internationally certified laboratory Certimin S.A. for analysis and checks of mineralized sections are made by sending reject samples to SGS del Peru S.A.C. Samples were assayed by ICP analysis and for assays greater than 10 g/t Au a gravimetric FAA finish assay is used.

Standards, blanks and duplicates are used in the sampling process as part of the QA/QC for the sampling in the cross cut. Additional check samples were sent to SGS del Peru S.A.C for carrying out spot check analysis verifications. The program, sampling, collection of samples and the QA/QC is implemented and followed by Alonso Sanchez, Chief Geologist for Dynacor Gold Mines, B.Eng and QP under the American Institute of Professional Geologists (AIPG).